Polyurea Protective Coatings
Brushable Polyurea
Detail-oriented coating option for repair zones and sites where spray equipment is impractical.
Model / series: Taihe brushable polyurea series
Application conditions
Edges, joints, repair areas and confined sites
Working principle
Mixed material is applied by brush or roller to prepared local areas.
System components
Two-component material, project-matched primer and optional topcoat; application equipment depends on spray or manual method.
Interfaces and feedback
Substrate, primer and optional topcoat compatibility must be confirmed before application.
Technical references
| Technical references | Reference value |
|---|---|
| Solids | 99% (company technical reference) |
| Surface dry | 35-60 s (formulation and test-condition dependent) |
| Tensile strength | 20-38 MPa (company technical reference) |
| Tear strength | 90-150 kN/m (company technical reference) |
| Shore A hardness | 55-95 (company technical reference) |
| Salt spray | Up to 2000 h reference; report status and applicable formulation must be confirmed |
Technical data scope
Company polyurea technical brochure
Confirm the selected formulation, configuration and test conditions before using a value in the final specification.
Polyurea data for engineering review
Two-component supply
Components A and B are supplied separately for controlled 1:1 mixing. Standard drum formats support both project-scale spraying and smaller application requirements.
- Component A: 200 kg/drum or 25 kg/drum; custom options available.
- Component B: 200 kg/drum or 25 kg/drum; custom options available.
Applications
Applicable scenarios
Edges, joints, repair areas and confined sites
Working principle
Mixed material is applied by brush or roller to prepared local areas.
Technical basis
Company polyurea technical brochure
Request a project match
Detail-oriented coating option for repair zones and sites where spray equipment is impractical.
Information needed for a focused recommendation
Substrate, existing coating, exposure, chemicals, operating temperature, access, target thickness and application schedule.
